Methods of using the timer:
1.Before using, please press the “C” button to reset,the display shows 00:00 00 and it is flashing state.
2.Press the “hour” and “minute” and “second” button separately to set the countdown of the electrify time,the display shows “ON”
3.Press the “start/pause” button to start the countdown.
At first press the “C” button to remove the original set;Then press “minute” set to”5″;press “seconds” set to “30”;Then press the “start/pause” to start the countdown,lamp open;After five minute 30 seconds countdown,plate burning machine tube closed.
This setting do not need to change, it is automatically saved.
【PARAMETER】Exposure size:18*12inch; Voltage:110v; Power:60W; Machine size:20*14*7inch;Wavelength:395nm;Mainly used for exposure small screens,printing plate,hot stamping
【INTELLIGENT TIMER】Adopt countdown timer to set the exposing time,after the exposure time is reached, the machine automatically turns off. The timer will automatically save and memory your set data
【HIGH QUALITY】This small exposure unit with 4 LED light tubes, which can be used for more than 10,000 hours in normal use.The machine is made of high-quality steel plate, and the surface is electrostatically sprayed, which is corrosion-resistant and durable
【DURABLE AND SAFE】Equipped with 8mm tempered glass plate which is resistant to friction and durable. Even if the glass is broken,the glass shards are no sharp so that to ensure the safety of operators
【HUMANIZED DESIGN】Equipped with 7.9*11.8*2.4inch sponge and you can place a flat weight on the sponge to improve the quantity of exposing.Equipped with shading cloth,cover the top of whole machine,block the UV damage to the operator